PCL Anti Whip Hose 0.6m of 7mm i/d Hose (Standard Adaptor One End & Male Thread R 1/4 Other End)
SKU: PCLHA2108
£10.92 incl VAT£9.10 excl VAT
PCL Air Tool Whip Hoses which distances an air tool from its air supply to prevent vibration is highly recommended by Health and Safety.
The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See tech specs for more info.
Table of Contents
Tech Specs
Back to TopHose Inside Diameter: | 7 mm / 1/4 in |
Hose Outside Diameter: | 14 mm |
Hose Length: | 0.6 m / 2 ft |
See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment.
A Health and Safety Guide has been produced which covers the use of pneumatic equipment.
The Health & Safety Executive Guide HS(G) 39 states "requirements for quick-acting couplings apply to most percussive and vibrating air tools, which may be fixed or handheld. If a quick-acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1m long), thus isolating the plug and socket from the tool vibration."
The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick-acting coupling.
General Info
Brand |
---|
SKU: | PCLHA2108 |
---|---|
Categories: | Cordless and Air Tools, Hoses, Connectors, Couplers & Adaptors, Tools & Equipment |
Equipment Dimensions
Back to TopDelivery
Back to TopRelated products
Tools & Equipment
Tools & Equipment
Tools & Equipment
Available Upon Request
Tools & Equipment
Tools & Equipment